Orabond 1" x 36yds Double Sided Mounting Tape

The 1395TM series General Purpose Tape is for the bonding of foams, paper and boards, indoor signs, and 10oz banner hems (for hemming 13oz or heavier material, use the 1399TM tape).

High-tack and medium-shear strength

Excellent resistance to UV light, solvents and plasticizers

160 deg C / 320 deg F long-term temperature resistance

5mil

This tape used to be called "ORABOND1", ORABOND1.5, AND ORABOND2", the banner hemming tape.

Orabond Polypropylene film 190 Micron 1" x 55yds

The 1399TM series High Performance Tissue Tape is used for POP displays, outdoor signs, and splicing on difficult board and 13oz or heavier banners.

High peel and shear strength for opaque applications

Excellent resistance to UV light, solvents and plasticizers

140 deg C / 284 deg F long-term temperature resistance

7.5mil

Edge 1" x 36 yds

This is a high tack, moderate dead load acrylic adhesive film coated on both sides of a high quality polyester film. Adhesion is excellent to many surfaces, and exhibits excellent U.V. and heat resistance. Use in applications where resistance to ultra violet light and excellent performance during temperature extremes are required. Bonds and laminates to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. Use for hemming banner materials (15oz or less). Also use it to mount displays, posters, mirrors, nameplates, and decorative wall products. 36 yards long.