ITacGreen Plus Repositionable Media

iTacPlus Printable Media 54"x 100'

panoRama iTacGreen Plus is new & improved!  This revolutionary film features a proprietary repositionable, removable adhesive.  But now is made with a polypropylene face film, which makes it very stable - it will not shrink! This product can be applied to a variety of smooth surfaces such as painted metal, glass, tile, granite, marble, sealed concrete, and sealed wood. It is extremely easy to install and remove, dimensionally stable and durable, leaves no adhesive residue, and is even washable! If it's applied in the wrong place, just peel it off and move it to your desired location. If the adhesive gets dirty, just wash the dirt off and then re-apply the graphic! iTacGreen Plus is also ideal for vehicle decals instead of magnetic signs! It adheres through car washes and takes the elements, yet is easy to peel off when it's not needed. Place the decal back onto the liner and store flat, and then re-apply it to the vehicle when it's needed again! 

iTacGreen Plus (also known as CourtWrap) can be used for a number of graphic applications, including:

  • Basketball courts and other athletic venues
  • Dance Floors
  • Counter Mats
  • Changeable menu board systems
  • Elevator graphics
  • Vehicle decals in place of magnetic signs.
  • *Note that the new iTacGreen Plus is thinner than the original iTacPlus (now only 3mil).  A laminate will be required to make the material thicker and more manageable for applications where the graphic will be moved & replace multiple times.  
    A textured laminate is required for any floor graphic applications.

    The new ProtectWalk textured laminate is a textured, non-slip laminate for use with the iTacGreen Plus involving floor and horizontal applications where foot traffic is present. This new version of laminate is now thicker at 7mil, still features a permanent clear acrylic adhesive, and is ANSI A137.1/A326.3, R10 Certified. ProtectWalk should be used on all floor graphic applications, and when used on vertical applications, will add to the thickness and rigidity of your graphics. This is helpful for vehicle decals and similar applications.

    New ProtectWalk is printable! Now create decorative frosted window graphics by printing on ProtectWalk with your eco-solvent or latex printer!

    The media & laminate kit includes one 10ft roll each of the iTacGreen Plus media and the ProtectWalk non-slip laminate.



    *Do not apply to vinyl or copper surfaces.
    *Do not attempt to remove film from surfaces subjected to high or extreme heat (such as a vehicle sitting in the hot sun). Material may stretch and leave adhesive residue behind. Wait until surface is cooled before removing the decal.

     

    iTacPlus Repositionable Media

    • Printing Inks: Solvent, Eco-Solvent, UV Cure, Latex, Screenprinting
    • Adhesive: Proprietary Long-Term Repositionable, Removable (Silver Metallic)
    • Indoor Durability: up to 4 years
    • Outdoor Durability: up to 3 years (vertical exposure)
    • Finish: White
    • Thickness: 3 mil
    ProtectWalk Non-Slip Laminate

    • Adhesive: Permanent Clear Acrylic
    • Indoor Durability: Up to 1 Year
    • Outdoor Durability: N/A
    • Finish: Textured
    • Thickness: 7 mil
    • Printability: Compatible with Solvent, Eco-Solvent, UV & Latex inks.

     
    Floor, Wall & Specialty Media - ITacGreen Plus Repositionable Media Brand: Continental 
    iTacPlus Repositionable Media
    • Qty
      54" x 100ft
      Price: $473.90
    • Qty
      54" x 50ft
      Price: $249.10
    • Qty
      54" x 10ft Media/Lam
      Price: $97.00
    • Qty
      24" x 20ft
      Price: $44.30
    • Qty
      30" x 20ft
      Price: $55.40
    ProtectWalk Non-Slip Laminate
    • Qty
      54" x 150ft
      Price: $161.30
    • Qty
      24" x 20ft
      Price: $20.50
    • Qty
      30" x 20ft
      Price: $49.40


    Colors on the web may not be representative of actual colors.
    Please call us at 800-635-6897 for a Color sample book.